GXSC ferroelectric memory GX85RS128 applied to vibration detection equipment, compatible with FM25V01

Vibration monitoring is the application of vibration sensors on mechanical equipment vibration signal acquisition, processing, and combined with the historical conditions of the monitored object, locate the failure point, analyze the cause of the failure of a predictive maintenance means, vibration detection process will produce a large number of real-time data, such as vibration frequency, amplitude, phase and other information.

The GXSC ferroelectric memory GX85RS128 has a high-speed read/write performance with an operating frequency of up to 25MHz and supports 40MHz high-speed read commands, which enables it to quickly store these data into the memory and read them out quickly when needed. vibration detection is usually a long and continuous process that requires frequent storage and updating of the data. the memory unit of the GX85RS128 can be The GX85RS128‘s memory cell can be used for 1E6 read/write operations, allowing it to work stably and reliably during long periods of vibration detection.

In some vibration detection scenarios, there may be unexpected situations such as sudden power outages or equipment failures, etc. The GX85RS128 is based on the ferroelectric process and silicon gate CMOS process technology to form a non-volatile memory cell, which does not require batteries to maintain data, and even after a power outage, previously stored vibration data will not be lost, and after the equipment is back to normal power supply, the data will still be able to be read and used in its entirety, thus ensuring data security and integrity. Ensures the safety and integrity of the data.

GX85RS128 Main Parameters:

- Capacity: 128Kb

- Interface type: SPI interface (mode 0 and mode 3)

- Operating voltage: 2.7V to 3.6V

- Operating frequency: 25MHz

- Power consumption: 4.2 mA, 9uA (standby)

- Data retention: 10 years @ 85°C (200 years @ 25°C)

- High-speed read characteristics: support 40MHz high-speed read command

- Operating ambient temperature range: -40°C to 85°C

- Package: 8-pin SOP package, RoHS compliant

- Replaces Fujitsu MB85RS128 and Cypress FM25V01