Replace ADC08200, 1GSPS analog-to-digital converter GX08200 widely used in industrial test equipme

In the industrial field of test equipment is mainly to obtain a variety of physical quantities of the test object, and the physical quantities into digital information that can be processed and analyzed, the need to use analog-to-digital converters to convert analog signals into digital signals, so that complex physical phenomena can be analyzed in the form of digital.

For example, in electronic circuit testing, analog-to-digital converters can accurately measure voltage, current and other electrical parameters. Whether testing the performance of tiny integrated circuit chips or monitoring the electrical characteristics of large-scale power equipment, high-precision analog-to-digital converters can provide accurate quantitative results to help detect faults, deviations and potential problems in circuits. GX08200, a 1GSPS conversion speed analog-to-digital converter, has been widely used in a variety of test equipment in the industrial field. The analog-to-digital converter can PIN TO PIN TI‘s ADC08200, which has a certain price advantage.

In the field of sensor testing, such as temperature, pressure, humidity and other types of sensor output is usually an analog signal. The high-performance analog-to-digital converter GX08200 is able to quickly and accurately convert these analog signals from sensors to digital values, providing the basis for subsequent data processing and analysis. This enables test equipment to accurately assess key indicators such as sensor performance, sensitivity and linearity.

The GX08200 is a low-power, high-speed analog-to-digital converter that can convert up to 1GSPS of 8bits of data on a single channel, driven by an external input clock. The chip contains an internal reference voltage source, serial SPI control interface and parallel LVDS/RSDS output clock and data. The chip features the following:

- Ultra-low power consumption: 510 mW@1GSPS

- Maximum differential signal input range: 1Vpp-1.2Vpp Internal self-contained reference voltage source

- DVDD=1.25V,DVDD2=2.35V

- AVDD=1.25V, AVDD2=2.35V

- PD, RSTN, SPI control interfaces support 1.8V CMOS logic

- Parallel LVDS/RSDS output

- Operating Ambient Temperature: -40°C to105°C

- 7x7mm2 QFN48 package

- Support SPI MODE3 read/write function